High Molecular Weight Polyethylene (HMW-PE) Cathodic Protection Cables: 600 Volts, Single Conductor, Stranded Copper

A direct burial DC cable for use in cathodic protection applications such as anode lead wires, header cables, structure connections, test leads and more.  The product can also be used for submerged installations in water tanks, offshore structures and other similar applications.

The polyethylene insulation is durable, abrasion resistant and flexible but has temperature and chemical limitations.

This cable insulation color is usually black (standard). However, other custom colors are available depending the quantity purchased.

1.Conductor

Stranded copper conductor conforms to ASTM Specification B-8.

2.Insulation

Insulation is high molecular weight polyethylene conforming to ASTM D-1248, Type 1, Class A, Category 5, Grades E4 & E5. Tensile Strengths Jl, J3. Available with high density polyethylene (Types II, III, IV) Class B & C (all colors).

Annealed, uncoated, stranded copper conductor, HMW polyethylene black insulation. Surface or indent printed. Custom printing available.

KYNAR PVDF insulated/HMWPE sheathed 600/1000V

Conductors: annealed copper

Insulation: KYNAR/PVDF Fluoropolymer (Radiation cross linked polyvinyldene fluoride)

Sheath/Jacket: HMWPE (High Molecular Weight Polyolefin) to ASTM Spec D-1248

Colours: Clear/Black

Voltage: 600/1000v

Operating temperature: Maximum 150°C, minimum bending minus -15°C

Minimum bending radius : 10m x OD of cable

Size: 6~240mm2